Wednesday, December 15, 2010

common xbox problems


Controller issues

Find your problem statement, and then try the listed solutions:
ProblemThings to try
The controller doesn’t work
The controller doesn’t vibrate.
The wireless controller can’t connect, or it drops out frequently.
An Xbox 360 wireless accessory does not connect to your Windows-based computer using the Xbox 360 Wireless Gaming Receiver for Windows.
  • Verify that the accessory is an officially licensed Xbox 360 wireless accessory.
  • Replace the batteries, or charge the wireless device.
  • Remove 2.4 GHz wireless devices in the area
  • Disconnect wireless devices attached to the computer.
  • Make sure that the receiver is connected to a powered USB 2.0 port (the light on the receiver is lit when connected).
  • Reconnect the receiver
Warning  Do not try to disassemble, service, or modify the Xbox 360 console, power supply, or any accessories. If you do this, you may put yourself at risk of serious injury or death from electric shock or fire. For safety reasons, such actions will void your warranty.
If the solutions presented here don’t resolve your issues, contact Xbox Support .

Headset issues

ProblemThings to try
The headset frequently disconnects or only works when near the console.
The headset can’t connect to a specific controller.
The headset won’t charge or turn on.
The battery discharges quickly.
There is unwanted noise or distortion.
  • Lower the volume on your TV and headset.
Voice chat doesn’t work.
Other players can’t hear you.
You cannot hear other players.
Warning  Do not try to disassemble, service, or modify the Xbox 360 Headset, power supply, or any accessories. If you do this, you may put yourself at risk of serious injury or death from electric shock or fire. For safety reasons, such actions will void your warranty.
If the solutions presented here don’t resolve your issues, contact Xbox Support.

Solutions for controller and headset issues. See the Controller issues table or the Headset issues to determine which solutions to try.

Reset the headset

  1. Press and hold the power button for two or more seconds.
  2. Turn off your Xbox 360 console
  3. Repeat the wireless connection steps .

Remove 2.4 GHz wireless devices

2.4-gigahertz (GHz) cordless phones, wireless networks, wireless video transmitters, microwave ovens, some mobile phones or cell phones, and Bluetooth headsets may interfere with the operation of your wireless headset. If any of these devices are in the same area as your console, unplug those devices, and then try to connect again.

Can’t connect to a specific Xbox 360 controller

When you try to connect an Xbox 360 Wireless Headset to an Xbox 360 console and associate it with a specific controller, the lights on the controller, headset, and console do not match up.
In the following illustration, the lights on the headset, controller, and console are all lit in the number 1 (upper left) position. This means the devices will work together. Lights indicate headset, controller, and console use the same position

Verify the desired position is available

Each of the four positions on an Xbox 360 console, as indicated by the light around the power button, can connect only one controller, one headset, or one headset and controller combination. If the devices are connected correctly, the lit position on the headset matches the lit position on the controller and the lit position on the console.
If a wired headset is already connected to a position, you cannot connect a wireless headset to the same position.
To determine if a wired headset is interfering with the wireless connection, follow these steps:
  1. Unplug the wired headset from the console.
  2. On the wireless headset, press the connect button.
Press the connect button on the wireless headset
Lights on the wireless headset and on the controller are lit when they are connected.
Headset light indicates a connected controller

If the headset connects to the wrong position on the console, press the connect button again to switch to the next available position.

Make sure that the wireless headset works properly

  1. Disconnect all other accessories from the Xbox 360 console, including any wired Xbox 360 controllers.
  2. Turn off all Xbox 360 Wireless Controllers:
    1. Press and hold the Guide button on the controller for three seconds.
    2. Confirm that you want to turn off only the controller.

      Turn off all wireless controllers
  3. Press the power button on the wireless headset.

    Press the power button on the wireless headset
  4. Press the connect button on the console.
    • On the original Xbox 360 console, the connect button is on the front between the Memory Unit ports and the power button.

      Original Xbox 360 connect button
    • On the Xbox 360 S console, the connect button is on the front next to the USB port cover.

      Xbox 360 S connect button
  5. Press the connect button on the wireless headset.

    Press the connect button on the wireless headset

    The lights around the power button on the console will spin and blink once. The position that remains lit is the position of the wireless headset.
  6. If you want to test if the wireless headset will connect to the other positions, press the connect button again. The wireless headset will connect to the next position.
If your wireless headset cannot connect to the console, the wireless headset might be defective. Contact Xbox Support for a replacement.
If the wireless headset can connect to a position, one of the controllers might be defective .

Test the controllers

If a wireless headset can connect to the console when no controllers are connected to the console, there is a problem with one of the controllers. To identify which controller is causing the problem, follow the steps below:
  1. If you are using a wireless controller, press the Guide button to turn on the controller. If you are using a wired controller, connect the controller to the first position on the console.

    Press the Guide button
  2. Press the connect button on the controller.

    Press the connect button on the controller
  3. On the wireless headset, press the connect button until the lit section on the controller Guide button matches the lit number on the wireless headset. If this is successful, go to the next step. If it is not, the controller might be defective. Try another controller.

    Press the connect button on the wireless headset
  4. Connect a second controller to the second position on the console. Leave the first controller connected to the first position the console.
  5. On the wireless headset, press the connect button until the lit number on the wireless headset matches the lit position on the second controller Guide button.
If this procedure is successful, repeat these steps for each additional controller. You can connect up to four controllers.
If you determine that a controller might be defective, contact Xbox Support for a replacement.

Headset will not charge or turn on

When you try to charge or turn on your Xbox 360 Wireless Headset, the numbered lights on the microphone should flash in sequence (1-2-3-4). If the headset cannot be charged or will not turn on, the lights might flash in a different sequence or not at all.

Headset lights
Charging problems occurs for one of the following reasons:
  • The wireless headset might be too hot or too cold. Environmental conditions, such as direct sunlight, might affect the temperature of your wireless headset and cause it to malfunction.
  • The headset might not be fully charged, or the power source or the charging adapter might be faulty.

Bring the headset to the correct temperature

If the headset is too hot or too cold when you try to charge it, the first two lights on the microphone flash repeatedly in the sequence 1-1-2.
  1. Disconnect the wireless headset from the power adapter or USB charging cable.

    Disconnect the wireless headset
  2. Move the wireless headset to a new location.
  3. When the temperature of the wireless headset returns to room temperature, reconnect the power adapter or the USB charging cable and try again.

Fully charge the battery

The battery included with a new wireless headset is not fully charged. The battery requires several discharge/charge cycles to reach its full capacity for long run times.
When the wireless headset is being charged, the lights on the microphone flash in sequence (1-2-3-4) repeatedly. When the battery is fully charged, all four lights on the microphone flash at the same time until you unplug the headset from the charging adapter. If the lights flash in a different pattern or do not flash at all, try one of the following:
  • Charge the headset overnight or for at least six hours to make sure that the battery is fully charged.
  • If you use a power adapter to charge the headset, connect the power adapter to a different power outlet, and then try again. If the headset still does not charge, try a different AC power adapter.
  • If you use the USB charging cable to charge the wireless headset, connect the USB cable to a different USB port on the console. If the headset still does not charge, try a different USB cable.
If you experience less-than-optimal run times after four discharge/charge cycles of the battery, contact Xbox Support .

Turn off mute

To turn off the mute function, briefly press the power button. Two beeps confirm that you have changed the mute setting.

Check your communication preferences

Make sure that your communication preferences are set to allow for Friends or to allow for Everyone .
To set communication preferences
  1. In the Xbox Dashboard, select System , and then press .
  2. Select Family Settings, and then press .
  3. Select Xbox Live Controls, and then press .
  4. Select Privacy and Friends, and then press .
  5. Select Communications, and then press .

Adjust your Voice preferences

  1. Press the Guide button on your controller.

    Press the Guide button
  2. Go to Settings .
  3. Select Preferences .
  4. Select Voice .
  5. Clear the Mute checkbox, and increase the volume to 10 .
  6. Under Voice Output, select Play Through Both .
  7. See if you can hear other players.
  8. If this doesn’t fix the problem, try selecting Play Through Headset under Voice Output .

Check your Privacy settings

Make sure that your console settings are not blocking voice chat. Here’s how:
  1. Go to My Xbox, and then select your avatar.
  2. Select Profile .
  3. Select Edit Profile .
  4. Select Privacy Settings .
  5. Select Voice and Text, and then choose either Everyone or Friends Only .

Make sure you don't have a NAT issue

To determine if you have a NAT issue, see Error: Your NAT type is set to strict (or moderate)

Turn on vibration

If your controller does not vibrate, make sure that vibration is turned on. Here's how:
  1. Press the Guide button on your controller.

    Press the Guide button
  2. Select Settings, and then select Preferences .
  3. Select Vibration .
  4. Make sure Enable Vibration is selected.
If your controller still does not vibrate, connect to Xbox LIVE, and update your console software if you are prompted to do so.

Try a different battery pack

  1. If you have another Xbox 360 Wireless Controller, take the battery pack off that controller and attach it to your controller. Then try to turn your controller on.
  2. If your controller works with a different battery pack attached, there might be something wrong with your original battery pack. Order a replacement battery pack.
If this doesn't solve the problem, try the next solution.

Try a rechargeable battery pack

If you or a friend has an Xbox 360 Rechargeable Battery Pack, attach that battery pack to your controller, and then try to use your controller
If your controller works with the rechargeable battery pack attached, order a replacement battery pack.

Connect the Xbox 360 Wireless Gaming Receiver to your computer

Step 1: Connect the Xbox 360 Wireless Gaming Receiver to your computer

  1. Remove the green label from the USB connector on the receiver.
  2. Insert the USB connector into a powered USB 2.0 port on the computer.

    Insert the receiver’s USB connector
    Note   The USB ports on the front of your computer are probably not powered USB 2.0 ports. Try using the ports on the back of your computer.
    A green light on the receiver indicates that the unit is working.
  3. If the Add New Hardware Wizard starts automatically, select Install the software automatically (Recommended), and then click Next . If the wizard installs the software successfully, click Finish, and then skip to Step 3: Connect an Xbox 360 wireless accessory to your computer .

Step 2: Install the receiver software

Before you can use wireless accessories with your computer, you might need to install some software on your computer. Install the software from the installation disc that came with your receiver.
  1. Insert the installation disc into the CD or DVD drive of your computer.
    Note   If the Setup program does not automatically start, navigate to your disc drive, and double-click the Setup program.
  2. Follow the steps in the wizard to install the software.
    Note   You might be prompted to restart the computer.

Step 3: Connect an Xbox 360 wireless accessory to your computer

  1. Turn on the Xbox 360 wireless accessory that you want to use with your receiver.
    For example, to turn on a controller, press and hold the Guide button. If you do not know how to turn on the accessory, read the documentation for that accessory.

    Turn on the accessory
  2. On the receiver, press the connect button. The light flashes green.
  3. On the wireless accessory, press the connect button. For example, on the controller, the connect button is on the back.

    Press the accessory’s connect button
    Green flashing lights on the accessory and on the receiver indicate that the device is trying to establish a connection. When the lights stop flashing and remain lit, the accessory is connected. For example, on a wireless controller, one of the lights around the Guide button will remain lit.

    Flashing green lights on the accessory

18 comments:

  1. Arԁuous Іsohunt never dіd аnyone аny harm lmao =)
    My web site www.download-iso.com

    ReplyDelete
  2. Нaгmonisκ som en nintendo wii lmao =)
    Feel free to surf my page - playstation Portable

    ReplyDelete
  3. En PlaуStation 3 har аlltіd åtminstone tνå siԁoг lоl :)
    Here is my website ... Nintendo DS Lite Accessories

    ReplyDelete
  4. 35κ Nintendo DS Lite-cоmputer lmaο ;-)
    Look into my page sony psp Go

    ReplyDelete
  5. Gamеs is usuallу nothіng but tοtаlly sure lol
    My weblog - PS4 Adaptors

    ReplyDelete
  6. Theгe is no moment like Windows 7-moments
    ROFL
    My site - Sony PSP 1000

    ReplyDelete
  7. aѕsassіns creed гevaltіonѕ leads
    off at 55 :)
    My site : Sony Playstation3

    ReplyDelete
  8. Thеsе minerals аrе аctually сrucіal to the wellbeing of уour humаn bοdy.
    The three lеѵelѕ of filtratіon procesѕ ωithin the ԁevice shοuld be enough to put your ωorгies to
    гest. It does the job effiсiently.

    Stoρ bу my weblοg - aquarium ii ro di reverse osmosis water filter aquasafe

    ReplyDelete
  9. This website was... how do you say it? Relevant!!
    Finally I've found something that helped me. Many thanks!

    Also visit my webpage ... raspberry ketone
    my website > raspberry ketones reviews

    ReplyDelete
  10. magnificent points altogether, you just won a new reader.
    What would you suggest in regards to your post that you simply made
    a few days ago? Any positive?

    Here is my weblog - diets that work

    ReplyDelete
  11. Τhis doеsn't really have to do with the topic right now, but I wanna ask if you might know where I could obtain a quality captcha plugin that I can implement on my blog?? I'm implementіng
    the same blog ρlatform as yοu and I'm having trouble locating one?

    Also visit my web blog - outdoor pizza ovens

    ReplyDelete
  12. I absolutely love your blog.. Great colors & theme.
    Did you develop this amazing site yourself? Please reply back as I'm planning to create my own blog and want to learn where you got this from or just what the theme is called. Kudos!

    my website ... エアジョーダン激安

    ReplyDelete
  13. Simply wish to say your article is as surprising.
    The clarity in your post is just nice and i could assume you're an expert on this subject. Well with your permission allow me to grab your RSS feed to keep updated with forthcoming post. Thanks a million and please carry on the enjoyable work.

    Also visit my web site ルイビトン 格安

    ReplyDelete
  14. A v2 electronic cigarette is the latest invention of electronic cigarettes to fill the industry.
    Smoking cigarettes is only the most common way one can use
    tobacco goods for smoking purposes. Now that the world has finally come to terms with how hazardous smoking can be, they're hunting for options if not a total ban on the concept of smoking. Your V2 electronic cigarette is usually active and has no on or off switch. He also gives advices to individuals who needed it, and gives an unbiased comment with regards to the items in the industry nowadays.

    Also visit my web page ... V2 cigs coupon code June 2013

    ReplyDelete
  15. Howdy very nice web site!! Man .. Beautiful .
    . Superb .. I will bookmark your web site and take the feeds additionally?
    I am glad to seek out numerous helpful info here in the submit,
    we need work out more strategies on this regard,
    thank you for sharing. . . . . .

    my weblog; 6:18 AM

    ReplyDelete
  16. What's up colleagues, its great article concerning cultureand completely defined, keep it up all the time.

    Have a look at my web-site - Click The Following Post

    ReplyDelete
  17. "Xbox Accessories" are really good ,..Thanks for sharing with us,.

    ReplyDelete